Print - DataCard SD260 Installation And Administration Manual

LcdConfigMenu—Enable or disable access to the Configuration menu on the
•
LCD panel menu system. (The Status and Maintenance menus cannot be
disabled.)
LedCardsPickedToCleaning—Set the number of cards to pick between
•
required cleaning. The card light blinks amber when the printer reaches this
value. If this value is set to 0, cards between cleaning are not tracked.
LedPrintheadCyclesToCleaning—Set the number of printhead cycles between
•
required cleaning. The card light blinks amber when the printer reaches this
value. If this value is set to 0, cycles between cleaning are not tracked.
LedRibbonLow—Set the percentage of ribbon remaining before being
•
notified that the ribbon is low and should be changed. The ribbon light blinks
amber when the ribbon reaches this value.
SpeakerEnabled—Enable or disable the external printer speaker. The speaker
•
provides a sound in addition to the front panel lights and LCD text.

Print

The Print selections provide a WebAdmin access‐level user with the ability to
fine‐tune print quality.
Description
1) CardRegistration
2) ColorManagement
3) FPower
4) FPowerDuplex
5) KCustom1Power
6) KCustom1Power1200DPI 0
7) KCustom1Power600DPI
8) KPower
9) KPower1200DPI
10) KPower600DPI
11) KPowerDuplex
46
Current Value
Default Value (unit)
0 0
sRGBColorSpace MatchSP
0 0
0 0
0 0
0
0 0
0 0
0 0
0 0
0 0
Allowed
Range
[-0.5 – 50.8]
[-100 – 100]
[-100 – 100]
[-100 – 100]
[-100 – 100]
[-100 – 100]
[-100 – 100]
[-100 – 100]
[-100 – 100]
[-100 – 100]
Printer Manager