Activitylog - DataCard SD260 Installation And Administration Manual

ActivityLog

The ActivityLog settings allow you to record technical information about the
printer. WebAdmin or WebService access‐level users can change settings in the
activity log to help troubleshoot and isolate a card production problem. You
specify the types of actions to include in the logs and set the severity level for
when the action should be written to the log. Filter severity level options are:
Emergency, Alert, Critical, Error, Warning, Notice, Information, Debug, Disabled.
Description
1) ExternalLog
2) ExternalLogServer
3) FilterCardActions
4) FilterConfigChanges
5) FilterJobStates
6) FilterSoapMsgs
7) FilterSystem
8) InternalLog
ExternalLog—Enable or disable writing the activity log to an external Syslog
•
server.
ExternalLogServer—Specify the IP address of the external Syslog server if you
•
are writing to an external log (ExternalLog is set to Enabled).
FilterCardActions—Write the start and completion of a card action with the
•
specified severity, and higher, to the activity log.
FilterConfigChanges—Write configuration change actions with the specified
•
severity, and higher, to the activity log.
FilterJobStates—Write changes to the state of a print or exception job with
•
the specified severity, and higher, to the activity log.
FilterSoapMsgs—Write DPCL/Soap (Simple Object Access Protocol) messages
•
from the printer with the specified severity, and higher, to the activity log.
SD Series Installation and Administrator's Guide
Default Value Current Value (unit)
Disabled Disabled
0.0.0.0 0.0.0.0
Notice Notice
Notice Notice
Notice Notice
Notice Notice
Notice Notice
Enabled Enabled
41