DataCard SD260 Installation And Administration Manual page 52

Update Current Values as needed, and then click Set Current to apply changes.
ActivityLogExternal—Enable or disable writing the activity log to an external
•
server.
ActivityLogInternal—Enable or disable the internal activity log.
•
CPX—Enable or disable the CPX communications protocol used by some
•
Datacard systems.
DPCL—Enable or disable DPCL command access to the printer through the
•
non‐secure port. DCPL must remain enabled when you use the XPS Card
Printer Driver.
DPCL2—Enable or disable DPCL2 command access to the printer through the
•
non‐secure port.
DPCL2Secure—Enable or disable DPCL2 command access to the printer
•
through the secure port.
DPCLSecure—Enable or disable DPCL command access to the printer through
•
the secure port.
NetworkAccessControl—Enable or disable network access control.
•
Plugin—Enable or disable the plugin feature for the printer to access an
•
installed plug‐in. This setting is used for OpenCard‐enabled printers.
RejectHopper—Enable or disable use of the reject hopper, if one is available,
•
for rejected cards. If this value is set to Disabled, the cards are placed in the
front hopper.
Remake—Enable or disable card remakes. If Remake is set to Enabled and a
•
print request fails, the print request is tried again with a new card. A card is
retried only once.
RemakeMethod—Select the card remake method. This setting does not
•
display if Remake is set to Disabled.
•
•
RetrieveDataTimeout—Specify the time period during which card data can be
•
retrieved. You can specify from 0 to 120 seconds. If the Current Value is 0,
data is not retrieved.
RibbonInitialize—Enable or disable initialization of the ribbon when the
•
printer is powered on.
44
Select ConserveSupplies to reprint the card out of queue order.
Select PreserveOrder to reprint the card in queue order.
Printer Manager