Removing The Smartcard Reader From The Module Holder; Removing The Wlan Module From The Module Holder; Removing And Installing The Memory Card Reader (Optional, 3½ Inch, Multicard) - Fujitsu CELSIUS W4 Series Operating Manual

System expansions

Removing the SmartCard reader from the module holder

1

Removing the WLAN module from the module holder

2
a
Removing and installing the memory card reader
(optional, 3½ inch, MultiCard)
You can also install a memory card reader or a SmartCard reader and/or a WLAN module for
wireless LAN (Local Area Network) in the drive bay for 3½ inch drives (see
the SmartCard reader and/or WLAN module (optional, 3½-Zoll)", Page
The memory card reader can, unlike the SmartCard reader and WLAN module,
be installed directly in the device without a module holder.
44
1
2
a
1
► Undo the screws (1).
► Pull the SmartCard reader out of the module
holder in the direction of the arrow (2).
► Undo the screws (1).
► Pull the WLAN module out of the module
holder in the direction of the arrow.
Fujitsu Technology Solutions
"Installing/removing
40).