Gehl SL7600 Operator's Manual page 67

Electrical System
Problem Possible Cause
Single light doesn't work:
Light bulb burned out, faulty
wiring.
Work lights not
functioning No lights at all; 20 ampere
properly. breaker tripped.
Faulty light switch or poor
ground.
Wiring to solenoids
disconnected or faulty.
Lift/Tilt and/or
Restraint bar or seat switch
drive lock
malfunction.
solenoids do not
Faulty solenoid valve coil.
work.
Faulty hydraulic solenoid
relay in instrument panel.
908274/BP1202
Remedy
Check and replace light bulb
as needed. Check wiring
connection to light.
Check circuit and locate
trouble before replacing fuse.
Replace light switch. Check
ground wire connections.
Troubleshoot circuit, repair.
Contact your dealer.
Contact your dealer.
Contact your dealer.
64