Gehl SL7600 Operator's Manual page 19

Battery Disconnect
A battery disconnect switch is located in the rear
of the skid loader. Turn the switch to the
position to disconnect the battery from the
electrical system.
Safety Interlock System
WARNING
mechanically or electrically bypassing any switches, relays or
solenoid valves.
An interlock system is provided on the loader for operator safety. Together
with solenoid valves, switches and relays, the interlock system:
» Prevents the engine from starting unless the operator is sitting on the seat
and the operator restraint bar is down.
» Disables the lift arm, auxiliary hydraulics, attachment tilt and wheel drives
anytime the operator leaves the seat, turns the keyswitch to
restraint bar.
Testing the Safety Interlock System
Before leaving a parked machine, check the safety interlock system for
proper operation:
Restraint Bar
With the engine running, raise the restraint bar. Test each of the controls.
There should be no more than a slight movement of the lift arm, hitch and
machine. If there is any significant movement, troubleshoot and correct
the problem immediately. Contact your dealer if necessary.
Seat Switch
With the engine off and the restraint bar lowered, unfasten your seatbelt.
Lift your weight off the seat. Try to start the engine. If the engine starts,
turn off the engine, and troubleshoot and correct the problem. Contact
your dealer if necessary.
908274/BP1202
OFF
NEVER defeat the safety interlock system by
Fig. 2: Battery Disconnect
Switch
or raises the
OFF
16