Gehl SL7600 Operator's Manual page 34

Auxiliary Hydraulic Controls
Auxiliary hydraulics are used
with an attachment that has a
mechanism requiring hydraulic
power of its own.
Important: Always be sure the
auxiliary hydraulic control is in
neutral before starting the
loader or removing the auxiliary
hydraulic couplers.
Standard Flow Auxiliary Hydraulics
Coupler hookup is located on the left lift
arm. "A" port is pressure, "B" port is
return when the auxiliary control is in the
detent position (refer to page 38). The
flow can be manually adjusted from
2 - 29 gpm (7,6-110 L/min) by turning the
flow control knob.
T-Bar and Dual Hand Controlled
Loaders: A foot pedal is used to control
the direction of oil flow. A stop is
provided to lock the foot pedal for
continuous operation.
Hand/Foot Controlled Loaders: The right handle
controls the direction of oil flow. A locking pin locks it
in the up position for continuous operation.
31
1
Fig. 16: Auxiliary Couplers
1. High Flow Couplers
2. Standard Couplers
Fig. 17: T-Bar and Dual Hand
Auxiliary Control
Fig. 19: Standard Flow
Control Knob
2
1
Fig. 18: Hand/ Foot
Auxiliary Control
1. Locking Pin
908274/BP1202