Gehl SL7600 Operator's Manual page 30

Hand/Foot Controls
Your Gehl loader may be equipped
with the hand/foot control option.
The handles control the drive and the
foot pedals control the lift/tilt.
Drive Controls
Forward, reverse, speed and turning
maneuvers are accomplished by
movement of the control handles. To
go forward, push both handles
forward; for reverse, pull both
handles rearward. For turning, move one handle farther forward or rearward
than the other handle. Turn direction is determined by which handle is moved
farther forward; to turn left, move the right handle farther forward than the
left handle. For sharp turns, move the handles in opposite directions.
Moving the handles farther from neutral increases the speed steadily to the
maximum travel speed. Tractive effort decreases as speed increases. To get
maximum tractive effort, move the handles only slightly away from the
neutral position. The engine will stall if the control is moved too far when
loading the bucket.
WARNING
starting the engine. Operate the controls gradually and smoothly.
Excessive speed and quick control movements without regard for
conditions and circumstances are hazardous and could cause an
accident.
27
Fig. 14: Hand/Foot Controls
1. Right Drive Control Handle
2. Left Drive Control Handle
3. Tilt Control Pedal
4. Lift Control Pedal
Be sure the controls are in neutral before
3
4
1
2
908274/BP1202