Gehl SL7600 Operator's Manual page 21

Important: With the keyswitch
properly, the lift arm will stay raised when the lift control is moved to lower
the lift arm. If the valve does not hold the lift arm, lower the lift arm
completely. Contact your Gehl dealer immediately to determine why the lift
arm lowers while the keyswitch is
Engagement
To engage the lift arm support device:
1. Raise the lift arm fully.
2. Stop the engine.
3. Remove the lift arm support device from its
storage location on the left rear link.
4. Place the support device on the left lift cylinder
with the long end of the support device facing
the front of the loader (Fig. 4).
5. Secure the support device with the lock pin.
Disengagement
To disengage the lift arm support device:
1. Raise the lift arm completely.
2. Stop the engine.
3. Remove the support device from the lift
cylinder and return it to its storage position on
the left rear link (Fig. 5).
4. Secure the support device with the lock pin.
908274/BP1202
and the solenoid valve functioning
OFF
.
OFF
Fig. 4:Lift Arm Support
Device Engaged
1. Lock Pin
2. Long End of Support
Device
Fig. 5: Lift Arm Support
Device Stored
2
1
18