Gehl SL7600 Operator's Manual page 26

Right Panel
Note: Items 1 through 8 are indicator lights which
display the following:
1. Air Filter Restriction (optional) -Lights if
the air filter becomes restricted, warning the
operator to stop the engine. Inspect the air
cleaner filters and replace if necessary. During
normal operation, this indicator should be
2. Engine Coolant Temperature – Lights if the
engine coolant gets too hot, warning the
operator to stop the engine. Allow the engine
to cool, determine the cause for the high
temperature and correct the problem before
restarting the
operation, this indicator should be
3. Hydraulic Oil Filter Restriction– Lights if
the hydraulic return filter becomes restricted,
warning the operator to stop the engine. Allow
the engine to cool then change the oil and filter.
During normal operation, this indicator should
be .
OFF
4. Hydraulic Oil Temperature – Lights if the
hydraulic oil becomes too hot, warning the
operator to stop engine. Allow the hydraulic
system to cool and determine the cause of the
high temperature. During normal operation,
this indicator should be
5. Fasten Seatbelt – A momentary visual (and
audible) indicator to remind the operator to
fasten the seatbelt.
6. Engine Oil Pressure – Lights if the engine oil
pressure drops too low, warning the operator to
immediately stop the engine and determine the
cause for the pressure drop. During normal
operation, this indicator should be
7. Battery – Lights if the charging voltage is too
high or too low. During normal operation, this
indicator should be
8. Preheat Indicator Lamp – Lights when the
preheat is active. During normal operation,
this indicator should be
23
engine. During normal
.
OFF
OFF.
.
OFF
.
OFF
.
OFF
.
OFF
1
2
3
4
12
13
14
Fig. 12: Right Panel
908274/BP1202
9
10
11
5
6
7
8