Gehl SL7600 Operator's Manual page 28

T-Bar Controls
Your Gehl loader may be equipped with
the T-Bar control option. The left T-Bar
controls the drive and the right T-Bar
controls the lift/tilt.
Drive Control
Forward, reverse, speed and turning
maneuvers are accomplished
movement of the left T-Bar. To go
forward, push the control forward; for
reverse, pull the control rearward. To
turn right, turn the control clockwise; to turn left, turn the control
counterclockwise. For gradual turns, move the T-Bar slightly forward or
rearward. For sharp turns, do not move the control forward or rearward, turn
only clockwise or counterclockwise.
Moving the T-Bar farther from neutral increases the speed steadily to the
maximum travel speed. Tractive effort decreases as speed increases. To get
maximum tractive effort, move the T-Bar only slightly away from the neutral
position. The engine will stall if the control is moved too far forward when
loading the bucket.
WARNING
starting the engine. Operate the T-Bars gradually and smoothly.
Excessive speed and quick T-Bar movements without regard for
conditions and circumstances are hazardous and could cause an
accident.
25
by
Fig. 13: T-Bar Controls
1. Drive Control
2. Lift/Tilt Control
Be sure the T-Bar controls are in neutral before
1
2
908274/BP1202