Gehl SL7600 Operator's Manual page 31

Lift/Tilt Controls
Moving the lift arm and tilting the attachment are accomplished by
movement of the foot pedals. The left pedal raises and lowers the lift arm; the
right pedal tilts the attachment. To raise the lift arm, use your heel to push
down on the left pedal; to lower the lift arm, use your toes to push down on the
left pedal. To tilt the attachment downward, use your toes to push down on
the right pedal; to tilt the attachment up or back, use your heel to push down
on the right pedal.
Note: The speed of the lift/tilt motion is directly proportional to the amount of
pedal movement and engine RPM.
To place the lift arm in the detent (float) position, use your toes to push the left
pedal all the way down, into the detent. This position allows the lowered lift
arm to float while traveling over changing ground conditions.
WARNING
Never push the left pedal into the float position
with the attachment loaded or raised, because this will cause the lift
arm to lower rapidly.
908274/BP1202 28