Lubrication
Listed below are the locations, temperature ranges and types of lubricants for
this machine. Refer to the separate engine manual for more information
regarding engine lubricants, quantities and grades required.
Note: Refer to the specific service sections for detailed information on periodic
checking and replenishing of lubricants.
Hydraulic
System Oil
Chaincase Oil
Grease Fittings Use lithium based grease
Engine Oil
Refer to Fig. 37 for grease fitting locations. Wipe dirt from the fittings before
greasing them to prevent contamination. Replace any missing or damaged
fittings. To minimize dirt build-up, avoid excessive greasing.
49
Use Petro Canada HVI60, Mobil DTE 15M or equivalent
which contains anti-rust, anti-foam and anti-oxidation
additives, and conforms to ISO VG46.
Capacity: 15 U.S. gallons (56,8 liters)
Use hydraulic system oil or SAE grade 15W-40 motor oil.
Capacity (each side): 3 U.S. gallons (11,4 liters)
Below 32°F (0°C) - Use SAE Grade* 10 or 10W-30
Above 32°F (0°C) - Use SAE Grade* 15W-40
*Service Classification: API - CF-4/CG-4
Capacity: 14.8 U.S. quarts (14 liters)
908274/BP1202