To Call Another Party While On A Conference Call; To Split A Conference Call - NEC DT700 User Manual

To call another part y while on a conf erence call
1
2
Figure 4.36 Start a new call
3
4

To split a conference call

1
2
Figure 4.37 Split Soft Key
DT700 User Manual
This feature may not be available on all systems. For more information,
Note:
contact your system administrator.
While on a conference call, press the Hold key, or press the Hold Soft Key to put the call
on hold. The other parties in the conference call will hear music on hold.
Press the NewCall Soft Key to start a new phone call.
Use the key pad to dial the telephone number of the party to be joined in the conference.
Press the Dial Soft Key to initiate the call, or wait a few seconds for the call to be
automatically dialed.
This call is treated as a separate phone call and cannot be added to any 3-
Note:
party conference call that is in progress.
C O N F E R E N C E S P L I T
Start a 3-way conference call with two other parties.
You can only split a conference call that you have initiated.
Note:
Press the Split Soft Key to split the conference into two separate calls.
Each party is now treated as a separate phone call.
After you have split a conference, you cannot rejoin the calls in a conference
Note:
without having one party hang up so you can start a new 3-way conference
call.
C O N F E R E N C E S H U T T L E
The Conference Shuttle feature allows you to switch between two separate phone
calls, putting one on hold while you are on the other call, before you join the calls in a
conference.
B A S I C P H O N E O P E R A T I O N
Call Transferring and Conferencing
4-65