To Place An Internal Call - NEC DT700 User Manual

Figure 4.7
2
Figure 4.8
3
Figure 4.9

To place an internal call

1
4-56
B A S I C P H O N E O P E R A T I O N
DT700 Basic Call Operation
NewCall Soft Key
Enter the outside line access code using the keypad (8, for example) if required, then
enter the telephone number of the outside party.
You can use the Delete Soft Key to go delete the last digit (backspace).
Enter number (external call)
Press the Dial Soft Key to initiate the call, or wait a few seconds for the call to be
automatically dialed.
Dial Soft Key
The call proceeds to the dialed party.
You can also dial the number, then lift the telephone handset or press the
Note:
Headset Soft Key to initiate a call.
I N T E R N A L C A L L S
Lift the handset, press the Speaker key, or press the NewCall Soft Key to receive dial
tone.
DT700 User Manual