Transferring Calls; Attended Transfer; Blind Transfer - NEC DT700 User Manual

Attended transfer

1
Figure 4.42 Transfer Key
2
3
Figure 4.43 Transfer to Number
4
5

Blind transfer

1
Figure 4.44 Transfer Key
2
DT700 User Manual
T R A N S F E R R I N G C A L L S
An Attended Transfer is when you consult with the other party before transferring the
call. You connect the two callers, and you are then disconnected from the call.
While on a call, press the Transfer key.
This puts the current call on hold so you can start to transfer the call.
Use the key pad to dial the telephone number to which the call is to be transferred.
Press the Dial Soft Key, or wait a few seconds for the call to be automatically dialed.
After the other party answers the call, you can speak to that person before you transfer
the call.
Press the Transfer button to transfer the original call to the new party. You will be
disconnected from both calls.
A blind transfer is when the call transfers immediately to the dialing extension without
waiting to see if the extension is picked up.
If the other caller does not answer or rejects the call, the call is routed to voice mail or
according to forwarding conditions. If there is no voice mail or forwarding conditions
set for the line you transfer to, the call will continue to ring.
While on a call, press the Transfer key.
This puts the current call on hold so you can start to transfer the call.
Press the Blind Soft, then use the key pad to dial the telephone number to which the call
is to be transferred.
B A S I C P H O N E O P E R A T I O N
Call Transferring and Conferencing
4-67