To Shuttle Between Calls During An Attended Transfer; To Switch From Transferring Calls To A Conference Call - NEC DT700 User Manual

To shuttle between calls during an Attended Transfer

1
Figure 4.48 Transfer Shuttle
To switch from tr ansfer ring calls to a conference call
1
2
3
Figure 4.49 Conf key on DT710 (ITL-2E) phone
Figure 4.50 Conf Soft Key on DT710 (ITL-6DE) phone
DT700 User Manual
While connected to both parties, press the Shuttle Soft Key.
You will be connected to the original caller. To continue to switch between the two
callers, press the Shuttle Soft Key.
You can also press the Conference Soft Key to connect both callers to you in a three
party conference call.
S W I T C H F R O M A T R A N S F E R T O A C O N F E R E N C E C A L L
If you start a transfer, you have the ability to start a conference call between the two
parties you can connected to in addition to the ability to transfer the call.
While on a call, press the Transfer key.
Use the key pad to dial the telephone number of the party to be transferred, then press
Dial Soft Key, or wait a few seconds for the call to be automatically dialed.
To make this a conference call between yourself and the other two parties, press the
Conf key, or press the Conf or Conference Soft Key.
B A S I C P H O N E O P E R A T I O N
Call Transferring and Conferencing
4-69