NEC DT700 User Manual page 133

Figure 5.117 Enter Telephone Number
5
Figure 5.118 Select Speed Dial Number
6
Figure 5.119 Monitor Settings
DT700 User Manual
Up to 24 characters may be entered for the number. Only digits, "*" and "#" may be
entered.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
• You can also press the Delete Soft Key to delete the last character entered, or
press the Cancel Soft Key to return to the previous screen.
To use the Programmable Key you originally pressed for the Speed Dial, press Enter
on the cursor pad or the OK Soft Key.
Or
If you want to use a different Programmable Key for the Speed Dial, use the telephone
keypad to enter the other Programmable Key number and press Enter
pad or the OK Soft Key.
The number of available Sped Dial Keys and their associated numbers depend on
your model of DT700 phone. For more information on the valid Speed Dial Keys for
the specific phone models, see "Speed Dial Key Numbering" on page 5-110.
Select the monitor settings for this speed dial, then press Enter
the OK Soft Key.
Monitoring can only be done on other lines that are internal to your system.
Note:
You cannot monitor external or outside lines.
Valid options for monitoring are:
1
• None - Do not monitor presence state changes for this Speed Dial Key
A D V A N C E D P H O N E F E A T U R E S
Speed Dial and Programmable Keys
b
on the cursor
b
on the cursor pad or
b
5-121