The Phone Does Not Power Up (Power Over Ethernet (Poe)); The Phone Does Not Power Up (Power Supply); Calling; The Phone Does Not Have A Dial Tone - NEC DT700 User Manual

Nec sip phone for univerge sphericall and is3000-sip@net platform
Hide thumbs Also See for DT700:
Table of Contents

Advertisement

The phone does not power up (Power Over Ethernet (PoE))

1
2
3
4

The phone does not power up (Power supply)

1
2
3
4
Figure 6.10 Registered Phone
Figure 6.11 Unregistered Phone

The phone does not have a dial tone

1
2
3
4
DT700 User Manual
Check that the network connector is firmly plugged in to both the phone and the network
jack.
If possible, try plugging your phone into another PoE jack on your network.
The problem may be with the network cord. Try a new network cord.
If you are still having problems with your phone, contact your system administrator.
Verify that the power supply is firmly plugged into the AC outlet. If possible, try plugging
the power supply into another AC outlet.
The problem may be with the power cord. Try a new power cord.
If possible, try plugging the phone into a PoE jack on your network.
If you are still having problems with your phone, contact your system administrator.
C A L L I N G
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If your phone has an LCD display, check that your phone is recognized as registered on
the network. Your phone must be registered on the network to make calls.
If you phone is not registered on the network, try plugging your phone into another
open port on the local area network.
If you need an outside access code to get to an outside line, you may not hear the
outside dial tone until you press the outside access code.
Verify that the phone is receiving power.
Press the Menu key, then go to
phone has an IP address, Subnet Mask, Default Gateway, and DNS Server listed. If any of
this information is missing, there may be a problem with your connection to the
network. Contact your system administrator.
Restart the phone:
Press the Menu key.
a.
5
Select
Reboot.
b.
Press the OK Soft Key or
c.
6
2
Status,
Network Information and verify that the
b
Enter key on the cursor pad to restart the phone.
P H O N E TR O U B L E S H O O T I N G

Calling

6-153

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents