To Restart Your Phone - NEC DT700 User Manual

5

To restart your phone

1
2
Figure 3.38 Main menu screen
3
Figure 3.39 Confirm Reboot
3-48
B A S I C S E T T I N G S / C O N F I G U R A T I O N
Basic Setup with the Menus and Cursor Pad
1
• Disable: When dialing Personal Directory or Call History entries, you will be
prompted to edit/confirm the number before the phone dials.
2
• Enable: When dialing from the Personal Directory or Call History, numbers
will be dialed as they appear in the Personal Directory or Call History. If your
system requires an outside line access code, you may not be able to dial entries
using the Call History.
b
Press Enter on the cursor pad or the OK Soft Key to accept the setting.
You can also press the Cancel Soft Key to exit without making any changes.
For more information on the Personal Directory and Speed Dials, see
Note:
Chapter 5, "Advanced Phone Features."
Press the Menu key.
5
Select Reboot Phone.
Press the OK Soft Key or
You will not have a dial tone on the phone or be able to make calls until the phone
restarts and re-registers on the network.
If you cannot
Note: restart
unplug the phone from power and the network for ten seconds, then reconnect
the telephone to your network and power to perform a
V I E W I N G P H O N E S E T T I N G S
If you are having problems with your phone, you may want to view the hardware
version, firmware version, or network information for your phone.
You cannot change these settings on your phone. To change any of these
Note:
settings, contact your system administrator.
b
Enter key on the cursor pad to restart the phone.
the phone using the Menus if your phone is locked up,
.
restart
DT700 User Manual