To Switch Between Two Calls - NEC DT700 User Manual

To switch between two calls

1
Figure 4.38 Conf key on DT710 (ITL-2E) phone
Figure 4.39 Conf Soft Key on DT710 (ITL-6DE) phone
Figure 4.40 Conference Soft Key on DT730 (ITL-12D, ITL-24D, and ITL-
2
3
4
Figure 4.41 Shuttle Soft Key
5
4-66
B A S I C P H O N E O P E R A T I O N
Call Transferring and Conferencing
You cannot shuttle between calls after you have joined two calls in a
Note:
conference call.
While on a call, press the Conf key, or press the Conf or Conference Soft Key.
32D) phones
Use the key pad to dial the telephone number of the party to be joined in the conference.
Press the Dial Soft Key to initiate the call, or wait a few seconds for the call to be
automatically dialed.
After you have connected to the second call, press the Shuttle Soft Key to switch
between calls without joining them in a conference.
The LCD will display the information for call you are currently on.
To join the two calls into a conference, press the Conference Soft Key.
After you have joined two calls in a conference call, you can no longer use
Note:
conference shuttle since the calls are now in one single conference call.
DT700 User Manual