Basic Phone Operation - NEC DT700 User Manual

B P
ASIC HONE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 4.1
DT700 User Manual
O
PERATION
These procedures encompass both the economy and value phones in the DT700
series lineup. The DT710 (ITL-2E) phone, however, does not have Soft Keys.
The DT710 (ITL-6DE) phone has a smaller screen display than is shown in the
Note:
examples in this section. You may have to scroll using the cursor pad and soft
keys to see all available options.
The following symbols represent the DT700's directional cursor pad and key pad:
Digit key
c
4-way scroll BACK key
(Redial key)
4-way scroll FORWARD key
(Directory key)
d
4-way scroll UP key
(Volume UP key)
b
4-way scroll DOWN key
(Volume DOWN key)
b
ENTER key
(center button on cursor pad)
The Soft Keys are buttons that change function depending on the situation.
Note:
Each Soft Key's current function is displayed on the LCD screen above the
button on the phone.
DT730 Soft Keys (ITL-12D, ITL-24D, ITL-32D)
User actions/Keys
Select corresponding menu Item
Return to User Settings menu
a
Select highlighted menu item
Move to previous menu item
Move to next menu item
Select highlighted menu item
Soft Keys
4
4-53