Introduction/Box Contents - Sonance SONAMP DSP 2-150 Instruction Manual

SONAMP DSP 2-150 MULTI-CHANNEL POWER AMPLIFIER INSTRUCTION MANUAL
Introduction
Thank you for purchasing the Sonance Sonamp DSP 2-150
amplifier. When properly installed, this amplifier will give you
many years of entertainment pleasure. To get the most out of your
new amplifier, please read this manual thoroughly before you
begin installation.
To achieve the best performance, Sonance recommends that this
amplifier be installed by a Sonance Authorized Dealer/Installer.
Box Contents
Your Sonamp DSP 2-150 box should contain:
(1) Instruction manual
(1) Network Connection Instructions
(1) Sonamp DSP 2-150 amplifier
(1) IEC power cord
(4) Feet
(2) Long rack ears
FIGURE 1: SONAMP DSP 2-150 MULTI-CHANNEL POWER AMPLIFIER
Unpacking
Save the carton and polystyrene inserts for future safe transport in
case the amplifier is moved or requires shipping for repair.
Before proceeding with installation, locate the serial number on the
rear panel of the unit and note it here for future reference:
S/N:_________________________________________________________
Placement
Place the amplifier on a level surface, in an upright position, out
of direct sunlight and away from windows through which rain
may enter.
Situate the amplifier away from heat sources such as hot air ducts
or radiators. Be sure that the amplifier is adequately ventilated by
convection or suitable cabinet fans.
• Never place any object on or against the amplifier.
• Never operate the amplifier on a carpeted surface as this will
compromise ventilation.
• When the amplifier is installed in any cabinet, the front or back
must be open during operation. Alternately, install fans in the
cabinet to assure continuous ventilation.
3