Network Connection Instructions - Sonance SONAMP DSP 2-150 Instruction Manual

SONAMP DSP 2-150 MULTI-CHANNEL POWER AMPLIFIER INSTRUCTION MANUAL
N E T W O R K C O N N E C T I O N
I N S T R U C T I O N S
Equipment List for Mac and PC
1. Computer or tablet
2. Network router with DHCP service enabled
3. Two RJ-45 cables (one when using wireless)
Color Coded Interface
Toggle/Pull-down Menu
Macintosh DHCP
1. The amplifier factory settings has DHCP set to ON.
2. Connect the amplifier to a network with router.
Make sure the computer and amplifier are on the same network.
3. Turn on the amplifier.
4. The amplifier will be issued an IP address by the router.
5. Use an IP Scanner to determine the IP Addresses of the Sonance DSP amps on the network.
We recommend Fing app for IOS.
6. Network devices will show up and the amplifier will be named Sonance.
7. Open up Safari or Chrome for Mac.
In the URL address window at the top enter the IP address of the Sonance DSP amplifier to configure.
Free Type Field
https://itunes.apple.com/us/app/fing-network-scanner/id430921107?mt=8
9
Single Action Menu