Safety - Sonance SONAMP DSP 2-150 Instruction Manual

I N S T R U C T I O N M A N U A L
®
SONAMP MULTI-CHANNEL
POWER AMPLIFIER WITH
DSP 2-150
Important Safety Information
You should always follow these basic safety precautions when using
your Sonamp DSP 2-150, to reduce the risk of fire, electric shock,
and injury to persons:
1. Read and retain instructions: Read all the safety and
operating instructions before operating the amplifier, and
retain them for future reference.
2. Heed warnings: Adhere to all warnings and precautions listed
on the amplifier and in the operating instructions.
3. Follow instructions: Follow all operating instructions.
4. Water: Never use the amplifier next to water.
5. Carts and stands: The amplifier should
be used only with a cart or stand that is
recommended by the manufacturer. An
amplifier and cart combination should be
moved with care.
6. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE
THE POLARIZED PLUG WITH AN EXTENSION CORD,
RECEPTACLE, OR OTHER OUTLETS UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
7. Ventilation: Situate the amplifier so that its location does not
interfere with its proper ventilation.
8. Heat: Situate the amplifier away from heat sources such as
radiators, stoves, or other appliances (including amplifiers) that
produce heat.
9. Grounding or polarization: Grounding or polarization are
precautions that should be taken so that these attributes are
not defeated.
10. Power-cord protection: Route power supply cords so that
they will not be walked on or pinched by items placed on or
against them.
11. Cleaning: To clean the amplifier, use "canned air" or wipe the
amplifier with a soft cloth. Do not use solvents, as they may
damage the amplifier.
12. Non-use periods: Unplug the amplifier's power cord from the
outlet when the amplifier will be left unused for a long period
of time.
13. Object entry: Care should be taken so that objects do not fall
through the opening of the enclosure.
14. Moisture: Do not expose the amplifier to dripping or splashing.
Do not place objects filled with liquids, such as vases, on
the amplifier.
15. Damage requiring service: Have the amplifier serviced by a
qualified service personnel when:
• The power supply cord or the plug has been damaged.
• Objects have fallen, or liquid has been spilled into
the amplifier.
• The amplifier has been exposed to rain.
• The amplifier does not appear to operate normally or exhibits
a marked change in performance.
• The amplifier has been dropped, or the enclosure damaged.
16. Servicing: The user should not attempt to service the amplifier
beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.
17. Lifting: Improper lifting of the 11 lbs. DSP 2-150 amp can cause
personal injury.
18. Power requirement: Do not connect the Sonamp to the
accessory outlet of any other component. A minimum 15 amp
(20 amp preferred) grounded wall outlet is required.
WARNING: THE POWER (MAINS) PLUG SERVES AS THE
AMPLIFIER'S DISCONNECT DEVICE. THE DISCONNECT DEVICE
SHALL REMAIN READILY OPERABLE DURING OPERATION.
TO ENSURE THAT THE DISCONNECT DEVICE (POWER PLUG)
IS EASILY ACCESSIBLE, THE USER SHALL NOT PLACE THE
AMPLIFIER IN A CONFINED AREA DURING OPERATION.
19. Storms: To prevent damage to components, unplug all
electronic equipment during thunderstorms.
1