Specifications - Sonance SONAMP DSP 2-150 Instruction Manual

Multi-channel power amplifier with sonarc
Hide thumbs Also See for SONAMP DSP 2-150:
Table of Contents

Advertisement

SONAMP DSP 2-150 MULTI-CHANNEL POWER AMPLIFIER INSTRUCTION MANUAL

SPECIFICATIONS

SONAMP DSP 2-150
Number of Channels
Power Output - 8 ohms (Stereo)
Power Output - 4 ohms (Stereo)
Power Output - 8 ohms (Bridged)
Frequency Response
Total Harmonic Distortion
Signal to Noise Ratio
Input Gain
Input Sensitivity
Input Impedance
Loop Output Impedance
Maximum Source Input Voltage
Communication Protocol
Power Consumption 120V AC
@8 ohms (sinewave, full power)
@4 ohms (sinewave, full power)
@8 ohms (sinewave, 1/8 power)
@4 ohms (sinewave, 1/8 power)
@idle
@IP or IR standby
@standby
Power Consumption 220V AC
@8 ohms (sinewave, full power)
@4 ohms (sinewave, full power)
@8 ohms (sinewave, 1/8 power)
@4 ohms (sinewave, 1/8 power)
@idle
@IP or IR standby
@standby
Heat Output
@8 ohms (sinewave, full power)
@4 ohms (sinewave, full power)
@8 ohms (sinewave, 1/8 power)
@4 ohms (sinewave, 1/8 power)
AC Voltage
AC Fuse
Rack Space Requirement
Dimensions w/ Feet (W x H x D)
Dimensions w/ Rack Ears w/o Feet (W x H x D)
Shipping Weight
CAD Files available for download at www.sonance.com/electronics/amplifiers/dsp
2 (1 stereo pair)
150 Watts RMS per channel (all channels driven)
224 Watts RMS per channel (all channels driven)
473 Watts
5Hz – 50kHz, bandwidth limited
0.07% (1kHz, 8 ohms) 0.06% (1kHz, 4 ohms)
-100dB (20Hz-20kHz)
29dB
100mV for 1 Watt Output @8 ohms
1230mV for 150 Watts Output @8 ohms
20k ohms
600 ohms
2.9V VAC RMS
TCP/IP (RJ-45 10/100 Base T)
371 Watts (all channels driven)
392 Watts (all channels driven)
72 Watts (all channels driven)
74 Watts (all channels driven)
31 Watts
1.5 Watts
0.48 Watts
359 Watts (all channels driven)
376 Watts (all channels driven)
69 Watts (all channels driven)
71 Watts (all channels driven)
28 Watts
1.1 Watts
0.5 Watts
242 BTU (all channels driven)
314 BTU (all channels driven)
118 BTU (all channels driven)
124 BTU (all channels driven)
100-120V@60Hz, 220-240V@50Hz
5A (T5-AL)
1U – 1/2 Rack Width
8 5/8" x 2 1/8" x 16 13/16" (219mm x 54mm x 427mm)
19" x 1 3/4" x 16 13/16" (482mm x 44mm x 427mm)
11 lbs (5.0kg)
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsp 2-750Sonamp dsp 8-130Sonamp dsp 2-750

Table of Contents