Specifications - Sonance SONAMP Sonamp 1230 User Manual

Professional matrix power amplifier
Hide thumbs Also See for SONAMP Sonamp 1230:
Table of Contents

Advertisement

Multiple Source/Multiple Zone with Paging (Figure 5)
Features
• 1 Zone is HIGH POWER with Bridged Outputs and IR Control
• 2 Zones are STEREO with Volume Controls
• 4 Zones are MONO with Impedance Matching Volume Controls and Paging
• 1 Zone is STEREO with Volume Control and Paging
• AUX Input for KSU Paging in Selected Zones
This configuration shows several rooms in stereo mode while
utilizing mono in selected areas. Note that certain areas receive
the paging signal. Due to its large size, the master bedroom
receives a bridged 4 channels providing 60 watts per channel .
Major Corporate System (Figure 6)
Features
• Automatic 2 source Main Music
• 8 Speakers on 2 Channels with Impedance Matching Volume Controls and
MONO Function
• 4 Zone Keypad System
• Executive Office controls with option to select from Main Source to Local
• AC Power Control of Main Music Sources
• Key Switch On/Off of Entire System, Auto-On Feature Defeated, 12v control
for AC Switching
• AUX Input for KSU Paging in Selected Areas
A specialized installation that includes remote key switch turn
on and usage of multi-zone controllers for individual spaces
with keypad controls. Executive suite is specialized with
main/local source selection and control of entire system.
Restrooms, small vestibules, elevators, and large rooms
arranged in multiple seating areas are some examples of spaces
more appropriate to monaural music. Each of the Sonamp
1230's 12 channels may be individually configured for monau-
ral reproduction if required to achieve smooth coverage of the
entire musical content of the source.
A Basic Six Zone System (Figure 7)
Features
• 6 Rooms
• 3 Music Sources
• 3 Video Sources
• Sonance Navigator Master keypads at each zone
This diagram depicts a basic six zone install featuring a
Sonance Navigator Harbor with three audio and three video
inputs feeding a Sonamp 1230 amplifier with voltage turn on,
as well as feeding video to three TVs located in zones two, five
and six.Each of the six zones is controlled by a Sonance Navigator
Master keypad. The source components are controlled by the
Harbor's Common IR outputs. When only a couple source com-
ponents are present,the 200VA switched power outlet can be used
to power up these devices. A voltage controlled power strip to
power up more source components is recommended to prevent
overloading of the switched AC outlet. The Control Output of
the Harbor should be used to control the power strip. (Do not
exceed the 100mA rating of the Control Output.)
MAINTAINING YOUR SONAMP 1230
The Sonamp® 1230 does not require periodic maintenance and
has no user serviceable parts inside. Do not remove the top
cover as this will increase your risk of electric shock. To keep
the amplifier clean, use only a soft cloth and never use any
solvents or abrasives. Fingerprints may be removed with a soft
cloth moistened only with a few drops of water.

SPECIFICATIONS

All Channels Driven
Output Power, Stereo mode, RMS: 30 Watts per channel, 12 channels @8Ω
45 Watts per channel, 12 channels @4Ω
60 Watts per channel, 6 channels @8Ω bridged
IHF: Dynamic Power:
49 Watts per channel, 12 channels @8Ω
78 Watts per channel,12 channels @4Ω
158 Watts per channel, 6 channels @8Ω bridged
Dynamic Headroom:
+2.13dB, 12 channels @8Ω
+2.38dB, 12 channels @4Ω
+4.15dB, 6 channels @8Ω bridged
Total Harmonic Distortion:
0.1% 20Hz-20kHz @8Ω (30 WRMS)
0.25% 20Hz-20kHz @4Ω (45 WRMS)
THD @ 1kHz less than 0.01% with 8Ω (30 WRMS)
THD @ 1kHz less than 0.01% with 4Ω (45 WRMS)
I.M. Distortion (SMPTE 4:1) @8Ω: 0.01% @ 30 Watts
Signal to Noise Ratio:
-100dB below rated output (A-weighted)
Input Sensitivity:
700 millivolt for 30 watts RMS @8Ω
Input Impedance:
20kΩ
1400 Watts maximum @ 4 ohms, full power
Power Consumption:
1440 Watts, maximum 4Ω full power
6.5 Watts, standby
10A AG
AC Fuse
15A AG
Optional Items
3-space Rack Mount Faceplate
16-3/4" x 5-3/4" x 15-3/8"
Dimensions:
10-1/2" x 16-3/4" x 18"
(425mm x 146mm x 391mm)
(267mm x 425mm x 457mm)
38 lbs (17KG)
RMF Dimensions:
19" x 5-1/4" x 15-3/8"
(483mm x 133mm x 391mm)
Shipping Weight:
38 lbs (17kg)
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents