Operating The Gas Burners; Control Knob - Atag FG6011C Instructions For Use, Installation, And Connection

Operating the gas burners

Control knob

Ignition and operation of
the burners
38
Gas valve is closed
High setting
Low setting
• Operate the gas burners using the knobs on the hob. A symbol
aroud each knob indicates the hihg and low setting.
• Rotate the knob through the high setting to the low setting and
back. Each burner can be adjusted continuously between the
high and low positions.
• Gas burners can be ignited using the electric ignition.
Before rotating the knob, it should fi rst be depressed.
Single-handed ignition
• In order to ignite the gas burner, press the selected burner
control knob and rotate it to the high setting. A spark plug will
be generated automatically, igniting the releasing gas.
• If the electric ignition should not work due to a power failure or
damp spark plugs, the gas can also be ignited using a match
or a gas lighter.
If the burner hasn't ignited after the knob has been
pressed for fi fteen seconds, close the burner and wait
at least one minute. Then, repeat the ignition process.
If the burner fl ame is extinguished (for any reason),
close the burner and wait at least one minute before
attempting to re-ignite it.
• To extinguish the fl ame and close the burner gas supply, rotate
the control knob to the right, to the 'OFF' position .