Operating The Gas Hob; Ignition And Adjustment - Atag FG9011EAN Manual

OPERATING THE GAS HOB

Igniting and adjusting
Position 0
High
Low
Burner zone
EN 16
A symbol next to the control knob indicates which burner is being
operated. Each burner is infinitely variable between high and low.
Spark ignition
Push in the control knob and turn it to the left.
The burner ignites.
▷ The control knob should be pushed in for about 10 seconds in
connection with the flame safeguard.
Flame safeguard
Your gas hob has a flame failure device. This ensures that the gas
supply is shut off if the flame goes out during cooking.
If the burner fails to ignite, check that:
• the burner cap is securely placed on the burner;
• the burner / spark plug is clean and dry.