Atag FG6011C Instructions For Use, Installation, And Connection page 40

40
• Select the type of setting you wish to make by pressing the
(A) sensor key. The selected symbol on the display fl ashes
quickly, indicating the function that you can set or change.
After fi ve seconds, the symbol starts fl ashing more slowly and
the time set is displayed. The symbols that are lit are selected,
but not currently shown on the display (6). The most recent
setting made is always displayed.
• Each press / activation of a sensor key is acknowledged by a
beep.
• If one of the value settings sensor keys (B) or (C) is touched
and kept pressed, the rate at which the value being set is
changing will increase.
• When the appliance is connected to the power supply or after
a power failure, the word "META" or "GLAS" is fi rst displayed
for a short while; then, the display fl ashes for some time. In
order to enable the operation of the oven, use the B and C
sensor keys to set the time of day.
• In case of a power failure which lasts less than two minutes, all
settings are kept.
To improve the response of the sensor keys, touch them
with a larger surface of your fi nger.
Setting the time of day (clock)
• Set the clock to the current time of day by pressing the settings
selection sensor key (A). Then, select the symbol (4).
• Use the (B) and (C) sensor key to set the exact time of day.
• Confi rm the setting by pressing the (A) sensor key again; if the
(A) key is not pressed, the setting is automatically confi rmed
after a few seconds.
The program timer can be used to program the oven operation
in three ways:
• Cooking time setting - immediate start of oven operation; after a
set period of time, the oven is turned off automatically.
• Cooking end time setting - the time at which oven operation is to
end is set.
• Delayed start setting - automatic start and end of oven operation
at a selected time.
Setting the cooking time
With this program mode, the duration of oven operation is set
(cooking time). Maximum setting allowed is 10 hours.
• Press the (A) sensor key to select the symbol (1). Use the (B)
and (C) sensor keys to set the duration / cooking time.
• Turn on the oven (use the corresponding oven knobs to set the
operation mode and temperature).