Cooking Surface; Important Warnings - Atag FG6011C Instructions For Use, Installation, And Connection

Cooking surface

Before using the
appliance for the fi rst time

Important warnings

Cookware
Wrong
Right
Gas cooking zones
No particular measures or procedures are required prior to the
fi rst use of a gas hob.
• For quick browning, set the burner to the maximum power
initially, and then continue cooking with minimum power.
• Gas burners are fi tted with thermoelectric protection devices. If
the burner fl ame is extinguished accidentally or unintentionally
(e.g. when some liquid boils over or when there is draught in
the room), gas supply is automatically cut off, thus preventing
the gas to be emitted into the room.
• Gas burner cover should always be placed very carefully on
the burner crown. Make sure the slots on the burner crown are
never obstructed.
1 Burner head
2 Burner base
3 Spark plug
4 Thermocouple
• Correctly selected cookware will enable optimum cooking time
and gas consumption. The diameter of the pan is the most
important parameter.
• Flames that reach over the edge of a pan which is too small,
can damage the cookware; furthermore, gas consumption is
higher in such cases.
• For combustion, the gas also needs air. If a pan is too
large, air supply to the burner is insuffi cient; as a result, the
combustion effect is lesser.
Burner type
Rapid (4.0 kW)
Semi rapid (2.0 kW)
Simmer (1.0 kW)
Pan diameter
220-300 mm
180-220 mm
120-180 mm
37