Atag FG6011C Instructions For Use, Installation, And Connection page 42

42
Setting the alarm timer
The clock can also be used independently of the oven operation,
as an alarm timer that sounds an alarm after the expiration of a
preset time.
• Use the (A) sensor key to select the symbol (3). Then, use
the (B) and (C) sensor keys to set the time before the alarm
sounds. Maximum setting allowed is 10 hours.
• When the set time has elapsed, an intermittent beep will
sound, which can be stopped by pressing any key; if no key is
pressed, the beep stops after one minute. The symbol (3) will
go off.
The last minute of the timer countdown is displayed in
second intervals.
Setting the beep volume (loudness)
The alarm volume can be set when no timer function is activated
(only current time of day is displayed).
• Press the (B) sensor key and hold it approximately
three seconds; a volume indicator will appear, and the
corresponding sample sound will sound. "oooo" indicates
maximum volume, and "o" indicates minimum volume. Use the
(B) sensor key to select among the four loudness levels.
• Confi rm the selected volume level by pressing the (A) sensor
key; if the (A) sensor key is not pressed, the setting will be
confi rmed and stored automatically after a few seconds.
Setting the child lock
Activation: Press the (A) sensor key to select the symbol (5).
Use the (B) and (C) sensor keys to activate the child lock; the
display will read "ON". Confi rm the setting by pressing the (A)
sensor key.
Deactivation: Press the (B) or (C) sensor to deactivate the child
lock; "OFF" is displayed.
The setting must be confi rmed by pressing the (A) sensor key.
- If the timer is locked after one of the timer functions has been
set, the oven will operate as usually; however, no changes to
the settings will be possible.
Display dimmer
Between midnight and 6 AM, the display automatically lights with
less intensity, if no timer function is set.
Deleting the timer settings
- All timer settings can be deleted any time by pressing the (B)
and (C) sensor keys simultaneously and holding them for three
seconds. The set programs are automatically interrupted and
the timer switches to display of the current time of day.