Kipor IG3000 Owner's Manual page 25

Engine faults that may affect emission
Any of the following faults must be repaired immediately. Consult with your authorized Kipor service
center for diagnosis and repair:
Hard starting or shut down after starting
Unstable idle speed
Shut down or backfire after applying an electrical load
Backfire or afterfire.
Black smoke and/or excessive fuel consumption
Replacement parts and accessories
The parts making up the emission control system applied to Kipor engine have been specifically
approved and certified by the regulatory agencies. You can trust the replacement parts supplied by
Kipor have been manufactured to the same production standard as the original parts. The use of
replacement parts or accessories which are not designed by Kipor may affect the engine emission
performance. The manufacturers of replacement parts and accessories have the responsibility to
guarantee that their replacement products will not adversely affect emission performance.
Maintenance
Maintain the generator according to the maintenance schedule in this section. Service items more
frequently when used in dusty areas, or under conditions of high load, temperature, and humidity.
Air Quality Index (only for California certified models)
CARB requires that an air quality index label be attached to every certified engine showing the engine
emission information for the emission duration period. The label is provided for the user to compare
the emission performance of different engines. The lower the air index, the better the engine emission
performance. The description of durability is helpful for the user to learn the engine emission duration
period and the service life of emission control system. Refer to the warranty section of this owner's
manual for more information.
Description
Short-term
Medium-term
Long-term
Emission duration period
50 hrs（0-80CC）, 125 hrs（＞80CC）
125 hrs （0-80CC）, 250 hrs（＞80CC）
300 hrs （0-80CC） , 500 hrs （＞80CC） , 1000 hrs （≥225CC）
19