Setup - Panasonic AG-HPD24P Operating Instructions Manual

SETUP

Use these menus to set up unit operations.
MENU
THUMBNAIL
OPERATION
PROPERTY
META DATA
STORAGE
SETUP
FILE
SYSTEM INFO
THUMBNAIL
Use this menu to make thumbnail settings.
Item
Select any of the following items you want to display and press
SET to add a check mark to the item. Select ALL HIDE to disable
item selection.
ALL HIDE: Hides all indicators
MARKER: Shows the shot mark indicator
TEXT MEMO: Shows the text memo indicator
WIDE: Shows the wide indicator
INDICATOR
PROXY: Shows the proxy indicator
NOTE:
• Regardless of the above settings, the bad clip indicator
incomplete clip indicator
• The WIDE indicator is not displayed in 3D REC/PB mode and
SYNC PB mode.
Select items to appear in the time display.
TC: Time code
UB: User bits
TIME: Time of recording
DATE: Date of recording
DATE TIME: Date and time of recording
CLIP NAME: Clip name
DATA DISPLAY
USER CLIP NAME: The first fifteen characters in the user clip
name
SLOT: Slot number
THUMBNAIL TC: Time code of thumbnail position
NOTE:
• SLOT is not displayed in 3D mode.
56
Setup Menu: Menu items
Settings and brief function description
XX indicates factory default settings.
(yellow) (red), unknown clip indicator
are always shown.
SYSTEM FREQ
indications
59.94 Hz
23.98 Hz
59-23 Hz
and
59.94 Hz
23.98 Hz
59-23 Hz
Mode
2D
3D SYNC PB
(Main)
50 Hz
24 Hz
60-24 Hz
M M
50 Hz
24 Hz
60-24 Hz
M M
M
M