Checking Card Status - Panasonic AG-HPD24P Operating Instructions Manual

Checking Card Status

Use the following steps to view P2 card slot status, P2 card
usage and other card information on the screen.
1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the Up/Down/Left/Right cursor buttons to
choose the PROPERTY - CARD STATUS menu
setting and press the SET button.
The status of P2 card will be displayed.
◆ NOTE:
• Choose the PROPERTY - PROPERTY SETUP - P2CARD CAP
menu setting to switch between remaining free space and used
space.
(➝ Setup Menu "PROPERTY" - "PROPERTY SETUP - P2 CARD
CAP" page 53)
26
Main Mode: Thumbnail Screen
3
2
4)
5)
6)
1)
Write protect mark
2)
P2 card status
1) 2)
Or
A write-protected P2 card is indicated by the
displayed here.
The remaining free memory on the P2 card is
displayed here in the form of a bar meter and a
percentage value.
Memory used on the P2 card is also displayed in the
form of a bar meter and a percentage value.
The following status information may also appear
depending on card status.
3)
mark