Panasonic AG-HPD24P Operating Instructions Manual page 67

Item
Selects the standard level.
FS-20: -20 dB (AG-HPD24P default value)
REF LEVEL
FS-18: -18 dB (AG-HPD24E default value)
FS-12: -12 dB
Selects channels to multiplex on the SD SDI output.
CH1-4: Outputs four channels (CH1-4).
CH5-8: Outputs four channels (CH5-8).
CH1-8: Outputs eight channels (CH1-8).
NOTE:
EMBD CH SEL
• Four channels (CH1-4) are always multiplexed during DV,
DVCPRO and DVCPRO50 playback.
• Some devices may not be able to receive 8 channels. Check
the specifications of the receiving equipment before setting
CH1-8.
Selects audio output via monitor outputs. Selects CH1 and CH2
outputs. HDMI output audio also conforms to this setting.
CH1 / CH2: Outputs CH1 to L and CH2 to R.
CH3 / CH4: Outputs CH3 to L and CH4 to R.
MONITOR CH
CH1 + 3 / CH2 + 4: Outputs CH1 + 3 to L and CH2 +4 to R.
CH5 / CH6: Outputs CH5 to L and CH6 to R.
CH7 / CH8: Outputs CH7 to L and CH8 to R.
CH5 + 7 / CH6 + 8: Outputs CH5 + 7 to L and CH6 + 8 to R.
Turns the speaker output on or off.
ON: Output is provided to the speakers.
SPEAKER OUT
OFF: No output is provided to the speakers. (BEEP sounds are
not output, either.)
Switches the channels that are indicated on the audio level meter.
CH1-4: Indicates the levels for CH1 to CH4.
LEVEL METER
CH5-8: Indicates the levels for CH5 to CH8.
DISPLAY
Use this menu to make display settings.
Item
Determines whether the thumbnail screen, menus, DIAG and
other screens will be output via VIDEO OUT or SDI OUT.
LCD: Not output (displayed only on LCD monitor)
LCD&VIDEO: Output to VIDEO OUT.
ALL: Output to both VIDEO OUT and SDI OUT.
OSD OUTPUT
NOTE:
• When the SETUP - SYSTEM - FREQUENCY menu setting is
23.98 Hz or 59-23, only LCD and LCD&VIDEO are available.
• ALL can only be selected in main mode.
Places a superimposed display on the video screen.
ALL: Displays all.
OSD GRADE
MODE&TC: Displays mode and time code.
Settings and brief function description
XX indicates factory default settings.
Settings and brief function description
XX indicates factory default settings.
SYSTEM FREQ
2D
indications
(Main)
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
SYSTEM FREQ
2D
indications
(Main)
59.94 Hz 50 Hz
23.98 Hz 59-23 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
Setup Menu: Menu items
Mode
3D SYNC PB
M M M
M
M M M
M M M
M M M
Mode
3D SYNC PB
M M M
M M M
67