Panasonic AG-HPD24P Operating Instructions Manual page 24

4.
Use the Up/Down/Left/Right cursor buttons to
choose the META DATA - LOAD menu setting and
press the SET button.
The meta data name of the meta data upload file on the SD
memory card appears.
◆ NOTE:
• When the metatada name is displayed, use the right cursor
button to show the file name. Use the left cursor button to
show the meta data name.
5.
Use the Up/Down/Left/Right cursor buttons to select
the file to load and press the SET button.
6.
Select YES in the confirmation message that
appears and press the SET button.
The file is now loaded.
7.
Press the MENU button to end processing.
24
Main Mode: Thumbnail Screen
■ Checking and revising loaded meta data
Use the following steps to check meta data loaded from an SD
memory card.
1.
Open the thumbnail screen.
2.
Press the MENU button and choose the META DATA
- PROPERTY menu setting.
A screen like the one shown below opens to announce that
meta data has been loaded.
3.
Use the Up/Down/Left/Right cursor buttons to move
the cursor to the item you want to change and press
the SET button.
Use this function to check loaded meta data settings.
3,4
2
5