Panasonic AG-HPD24P Operating Instructions Manual page 59

BASIC
Use this menu to set up basic operations.
Item
Determines whether or not the thumbnail screen will appear when
the unit is powered up.
POWER ON
THUMBNAIL: Opens the thumbnail screen
GUI
OFF: Does not open the thumbnail screen
Specifies whether to invoke the EE mode or playback mode when
STOP is pressed.
STOP EE SEL
EE: EE mode
PB: Playback mode
Specifies whether or not to make a VFR recording when the
recording format is 720p.
VFR REC
ON: Makes VFR recording
OFF: Does not make VFR recording
Specifies whether or not to make loop recording.
ON: Makes loop recording
OFF: Does not make loop recording
LOOP REC
NOTE:
• Turning the power off cancels this setting. The unit will then
start up using the default value (OFF) next time it is powered
up.
Determines whether record start and stop should be performed
automatically according to the record and stop signals in the HD
SDI input signals from a camera-recorder.
TYPE1: Recording and stopping is performed automatically
according to the recording/stopping signals in the LTC
information attached to HD SDI signals.
TYPE2: Recording and stopping is performed automatically
according to the recording/stopping signals in the SVITC
information attached to HD SDI signals.
TYPE3: Set when other manufacturer's camera-recorders are
used.
OFF: No automatic recording/stopping
NOTE:
• When the thumbnail screen is displayed, this setting is
disabled and has no effect.
• When set to something other than OFF and REC PAUSE
AUTO REC
status is engaged in REMOTE mode, AREC appears in a
superimposed screen.
• Set the REMOTE mode.
• For details on TYPE1 or TYPE2, refer to "Panasonic camera-
recorders, recording format and record start/stop signals
(Recording Mark)" (page 61).
• To start automatic recording, press the REC and STILL
buttons simultaneously to place this unit in REC PAUSE
mode. Automatic recording does not start any mode other
than REC PAUSE mode. The unit returns to REC PAUSE
mode when automatic stop is activated.
• In normal recording mode, this setting is not available and
auto stop is not activated.
• For the devices verified as TYPE3 devices, visit the following
Web site:
For English: http://panasonic.biz/sav/autorec_e
Settings and brief function description
XX indicates factory default settings.
SYSTEM FREQ
2D
indications
(Main)
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
Setup Menu: Menu items
Mode
3D SYNC PB
M M M
M M
M
M
M M
59