Panasonic AG-HPD24P Operating Instructions Manual page 68

Item
Specifies the superimposed text.
Here, data indicates the CTL/TC/UB value selected with the
COUNTER button.
TIME: Data
T&STA: Data and operating status
T&S&M: Data, operating status, clip number, video format,
audio bit number
T&RT: Data and REC TIME
T&RD: Data and REC DATE
T&UB: Data and user bits
OSD TC
However, when UB is selected with the COUNTER button, the
SELECT
time code is indicated after the user bits.
T&CTL: Data and CTL
However, when CTL is selected with the COUNTER button,
the time code is indicated after CTL data.
T&T: Data and time code
NOTE:
• An error message appears in the superimposed display if a
warning or error occurs when T&S&M is selected.
• The audio bit number is indicated as 16b even for a clip
without audio data.
Selects waveform and vectorscope display.
WAVE: Waveform display
WFM TYPE
VECTOR: Vectorscope display
OFF: Not displayed
Selects cross hatch display for SDI or HDMI output.
1% - 6%: Displays a 1% wide pattern.
OFF: Not displayed
CROSS
NOTE:
HATCH
• Not displayed for 480i or 576i output.
• Not displayed in 3D REC/PB mode and SYNC PB mode when
the SETUP - VIDEO - OUTPUT SEL menu setting is HDMI (FP).
Determines whether or not the 4:3 marker appears on the LCD
monitor.
4:3 MARKER
ON: Displayed.
OFF: Not displayed.
68
Setup Menu: Menu items
Settings and brief function description
XX indicates factory default settings.
SYSTEM FREQ
indications
(Main)
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
Mode
2D
3D SYNC PB
M M M
M M M
M M M
M