Automatic Rearming; Silent Arming/Disarming - Datatool S4 User Manual

Disarming the system after it has been triggered
If the system has been triggered in your absence,
a long audible tone will be heard when the alarm
system is disarmed using the transmitter.
The system includes a diagnostic mode, which allows
you to identify the circuit that triggered the alarm
system.
After the long audible tone, the siren will beep and
the LED will flash a number of times to indicate what
triggered the alarm system.
Diagnostic chart
The Positive or Negative supply to the
1 alarm has been lost (the fuse may have
blown)
The alarm has detected the ignition
2
being turned on whilst armed
Movement Detection — Motorcycle has
3
been moved
Shock Sensor Detection — Motorcycle
4
has been nudged too many times
5 Trigger switch 1 has been initiated
6 Trigger switch 2 has been initiated
All S4 Alarm systems store the last five triggers
within their memory. This can only be accessed by an
approved Datatool Installer to assist them in servicing
®
your system.
Automatic re-arming
To ensure the machine remains covered at the level
chosen the last time you armed it, when the system
is disarmed it automatically starts a 45 second
countdown after which the system will automatically
re-arm at the same level as it was last armed in (i.e.
passive immobiliser, full alarm or full alarm minus
movement sensors).
If the ignition is turned or one of the trigger switches
is operated (e.g. seat removed if the switch is fitted to
it) within the 45 second countdown period, the unit will
passively immobilise.
NOTE: If full passive arming has been selected and the
ignition is turned ON/OFF the alarm will re-arm fully.
If one of the trigger switches has been operated the
alarm will only immobilise.

Silent arming/disarming

If you have asked your dealer to select the arm/disarm
tones you can still arm or disarm the system without
the tones on a one-off basis.
To arm/disarm silently, simply press the BLACK
button of the remote control followed by the GREY
button. The system will arm or disarm for this one
operation and only flash the indicators.
NOTE: The inclusion of the arm and disarm indication
beeps is strictly forbidden in all EU countries.
Press BLACK Press GREY Flashes only
7