Entering A New Pin Code - Datatool S4 User Manual

Entering a new PIN code

To initialise the PIN number the following procedure should be followed:
Ignition
ON
To set To set
first digit second digit
One beep & flash Ignition ON
Ignition OFF four beeps & flash
Ignition OFF
1000 1400
You can disarm the
alarm with the
transmitter at anytime
Changing your PIN
The PIN can be changed at any time simply by
repeating the above procedure. The original PIN will be
deleted and the new PIN will disarm the alarm.
NOTE:
1. The factory set PIN is 0000. This PIN will not
operate the alarm so it is important you set your
own personal PIN.
2. If you do not set a PIN you will not be able to
disarm the system should you lose or damage
your remote control.
Ignition
Ignition
ON within
OFF
5 secs
ONE LONG TONE
To set To set
third digit fourth digit
Ignition ON Ignition ON
four beeps & flash six beeps & flash
Ignition OFF Ignition OFF
1420 1426
DON'T WORRY IF YOU GET IT WRONG
If ignition is left OFF and
no action is taken within
3 minutes, the alarm will
revert to service mode
Press both buttons
simultaneously within 10 seconds
confirmation beep 3 secs
Repeat procedure to confirm new PIN
To confirm
first digit second digit
One beep & flash
Ignition OFF four beeps & flash
1000
New PIN
1426
(3 long tones if incorrect confirmation)
3. The PIN is also required to add further remote
controls or change the operation of the alarm via
the software switches.
4. Should you require your dealer to change any
settings or add a new remote control you should
inform them of your PIN. They will still be able to
carry out customisation of the unit but they will
have to over-write your existing PIN and you will
have to re-enter your preferred number.
Ignition Ignition
OFF ON
To confirm To confirm
third digit
Ignition ON Ignition ON
two beeps & flash
Ignition OFF Ignition OFF
1400 1420
TWO SHORT TONES
If ignition is left ON for
more than 10 seconds,
the alarm will revert to
disarmed mode
LED on bike
flashes rapidly
for 3 seconds
To confirm
fourth digit
Ignition ON
six beeps & flash
Ignition OFF
1426
11