Datatool S4 User Manual page 17

Extending your security
Extra siren/Pager output
This system contains a supplementary output which
becomes positive only when the siren is sounding.
This wire is identified by a green and yellow tag on the
end.
The position of this wire is detailed on your certificate
of installation.
This output can be used to drive extra sirens, pagers
or telephone diallers. Your dealer can give you advice
regarding any extras you may wish to add along with
costs.
WARNING: Do not connect the extra siren wire
directly to your motorcycle horn. Should you do
this, the output may be damaged.
Covering accessories
The alarm system has a secondary trigger input, which
in certain instances may be able to be connected to
the side stand or to be used to offer some protection to
detachable luggage etc, by looping an extension cable
through it.
This not part of the standard installation so please
discuss this with your dealer.
FCC:
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Any changes or modifications not expressly approved
by the party responsible for compliance could void the
users authority to operate the equipment.
17