Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Datatool Manuals
  4. Car Alarm
  5. S4
  6. Manual

Datatool S4 Manual

Hide thumbs Also See for S4:
1
2

Advertisement

Quick Links

Download this manual
Coding new transmitters, changing siren tones, passive arming selection
Ignition
ON
Press GREY button
To set
To set
first digit
second digit
One beep/
Ignition ON
flash
Four beeps/
Ignition OFF
flashes
Ignition OFF
1000
1400
The PIN can be changed at any time by entering a new number by the above procedure
Example PIN learn
Number being learnt 1426
Ignition
Ignition
ON within
OFF
5 seconds
ONE LONG TONE
To set
To set
third digit
fourth digit
Ignition ON
Ignition ON
Two beeps/
Six beeps/
flashes
flashes
Ignition OFF
Ignition OFF
1420
1426
Press both buttons
Simultaneously within 10 seconds
Confirmation beep 3 seconds
Repeat procedure to confirm new PIN
To confirm
first digit
Ignition ON
One beep/
flash
Ignition OFF
1000
New PIN
1426
(3 long tones if incorrect confirmation)
Ignition
Ignition
OFF
ON
To confirm
To confirm
second digit
third digit
Ignition ON
Ignition ON
Four beeps/
Two beeps/
flashes
flashes
Ignition OFF
Ignition OFF
1400
1420
TWO SHORT TONES
LED on bike
Flashes rapidly
For 3 seconds
To confirm
fourth digit
Ignition ON
Six beeps/
flashes
Ignition OFF
1426

Advertisement

loading

Related Manuals for Datatool S4

Summary of Contents for Datatool S4

  • Page 1 Coding new transmitters, changing siren tones, passive arming selection Example PIN learn Number being learnt 1426 Ignition Ignition Ignition Ignition Ignition ON within 5 seconds LED on bike Press both buttons Press GREY button Flashes rapidly Simultaneously within 10 seconds For 3 seconds Confirmation beep 3 seconds ONE LONG TONE...
  • Page 2 Coding new transmitters, changing siren tones, passive arming selection It will not be possible to follow the procedures below without first having registered a PIN number to the alarm system Press Grey button on transmitter or enter PIN number to disarm alarm Turn Ignition switch ON, OFF, ON, OFF, ON (within 7 seconds) Enter PIN number (after last number has been entered a long tone will be heard) Turn ON Ignition switch then press Grey button on a new or existing transmitter...