CONTENTS Dear Customer, 1.0 - INTRODUCTORY NOTE............PAGE 3 Thank you for choosing a Datatool product. This Thatcham approved 2.0 - ALARM CONTROL DEVICES........... PAGE 4 7854T alarm system has been designed and manufactured in Italy 2.1 - Remote control................
2.0 - ALARM CONTROL DEVICES 3.0 - ALARM OPERATION The 2-button remote control and the override touch key are used to operate the 3.1 - Arming alarm system. Press remote control button 1 or touch the override key to its receptacle to arm the alarm.
Page 4
3.9 - Limiting acoustic signals 3.6 - Motion sensor exclusion Alarm conditions caused by unauthorised movement or seat/topcase opening, It is recommended that if you are travelling by ferry or transporting your will trigger a maximum of 8 consecutive alarm cycles. The siren will then be motorcycle that you disable the motion sensor.
Page 5
4.0 - PROGRAMMABLE FEATURES 7.0 - REPLACING REMOTE CONTROL BATTERIES The alarm is factory preset with the following features enabled: If the batteries are running low the status LED will blink at the press of a button. To replace the batteries proceed as follows: Factory settings Feature State...
Need help?
Do you have a question about the EVO PRO and is the answer not in the manual?
Questions and answers