Satel INTEGRA User Manual page 2

WARNING
In order to avoid any operational problems with the control panel, it is recommended that you
become familiar with this manual before you start using the equipment.
Making any construction changes or unauthorized repairs is prohibited. This applies, in
particular, to modification of assemblies and components. Maintenance and/or repair
operations should be performed by authorized personnel (i.e. the installer or factory service).
The control panel should be connected to analog lines only. Connecting its telephone circuit
to a digital network (e.g. ISDN) may cause damage to the equipment. In case of changing the
analog line to the digital one, it is necessary to contact the alarm system installer.
Pay special attention if the telephone line used by the control panel is frequently busy and/or
failures are reported concerning the line and/or monitoring. Report such situations to the
alarm system installer immediately.
CAUTION!
The alarm system is fitted with a battery. After expiry of its lifetime, the battery must not be
thrown away, but disposed of as required by the existing regulations (European Directives
91/157/EEC and 93/86/EEC).
The latest EC declaration of conformity and product approval certificates
are available for downloading on website www.satel.pl
The INTEGRA alarm control panels meet requirements as per CLC/TS 50131-3, Grade 3,
and have been certified by Det Norske Veritas Certification AS, Norway.
Environmental class of the INTEGRA series control panels: II.