Led Behavior - Brickcom Hydra Series Hardware User's Manual

LED Behavior

Function LED Behavior
Power Continuous Illumination
Power Unlit
Status Continuous Illumination
Status Unlit
Status Blinking
Internet Continuous Illumination
Internet Unlit
Camera Blinking
1/2/3
Camera Continuous Illumination
1/2/3
Hardware Reset
The Reset Button can be used to reboot the camera or restore it to the factory default
settings. If the camera experiences a problem, rebooting the camera may fix the
problem. If the problem remains, please restore the camera to the factory default
settings and reinstall the software.
 To Reboot − Press and hold the Reset Button for one second using a paper clip or
thin object. Wait for the camera to reboot.
 To Restore − Press and hold the Reset Button for ten seconds until the LED light
turns off. When it is successfully restored, the LED will be blue during the normal
Reset Button
Description
Normal Operation
Power off
Connect to the switch by Ethernet or WiFi
1. Power off
2. No connection
Data Transmission via Ethernet
Connect to Internet
1. Power off
2. No Connection
Upgrading firmware
Firmware is successfully upgraded
11