Launch Easyconfig - Brickcom Hydra Series Hardware User's Manual

Launch EasyConfig

Users can search cameras by EasyConfig and configure the settings below:

IP address configuration

Easylink configuration

Live View & Individual Camera Modification

BRC64
To launch EasyConfig, select "EasyConfig" from the start menu. If Complete Setup type
was used in the software installation, an EasyConfig icon was installed on the desktop.
Double click
If Custom Setup type was used in the software installation but an EasyConfig icon was
not installed on the desktop, the program will be installed under "C:\Program
Files\Brickcom\EasyConfig" unless the program was saved to a preferred directory.
NOTE - Check <Skip the hardware installation guide> to skip checking the
hardware connection. To check the hardware installation settings, do not check the option
box.
to launch EasyConfig.
21