Table of Contents
Advertisement
6.
If <Set IP Address configuration manually> is selected, the following window will
be displayed.
7.
If the camera supports the EasyLink
displayed. Otherwise, this window will not be shown.
*If desired, click <Skip> to skip this setting. EasyLink
function which allows users to assign a unique EasyLink name to their network
camera's IP address. There is no need to configure the router to open up ports or
TM
function, the following window will be
TM
is a unique Brickcom
26
Advertisement
Table of Contents
Need help?
Do you have a question about the Hydra Series and is the answer not in the manual?
Questions and answers