Vsl: Setup Tab - PRESONUS StudioLive 16.0.2 Owner's Manual

7 Software: Universal Control, SL Remote, Capture, and Studio One Artist
7.2 VSL: Virtual StudioLive

VSL: Setup Tab

7.2.5
Flexible Inputs Router
MIDI Control Mode Menu
Scene Recall Menu
76 76
The Setup Tab provides access to key system parameters. From the
Setup tab, you can define which Recalling Filters are enabled, set all
parameters for MIDI Control Mode, select the source for the Flexible
Inputs pair, and create a password with which to lock your StudioLive.
As discussed in Section 6.4.2, the StudioLive allows you to choose
between recording analog Input 15 and 16 or the Main Bus. This is
done via the Flexible Inputs Router on the Setup tab. By default, your
StudioLive is configured to record inputs 15 and 16 on FireWire Sends
15 and 16. To record the Main Bus mix instead, simply repatch the Main
Bus to FireWire Sends 15 and 16 using the Flexible Inputs Router.
The Main Bus is automatically set to send its signal post-Fat
Channel dynamics and post-EQ (where applicable). No matter
which source is selected in the Flexible Inputs Router, you
will see Inputs 15 and 16 in your recording application.
MIDI Control Mode is a powerful feature that allows you to control key
StudioLive parameters remotely, using a MIDI Controller.
See Section 5.5 for complete details.
As discussed in Section 5.1, your StudioLive allows you to decide which
group of parameters you would like to recall with a Scene. The Scene
Recall menu on the Setup tab corresponds directly with the Scene Recall
menu in your StudioLive.
PreSonus StudioLive 16.0.2
™