Owner's Manual
Internal FX Send Controls
4.4.2
Internal Effects Send
Select Button
Main Assign Button
Aux Assign Button
Output Level Knob
Enables Fat Channel Viewing.
As described in section 4.1.1, the Select button routes its Effects bus through the Fat
Channel, allowing you to add dynamics processing and EQ.
Assigns/Unassigns FX bus to Main Output.
This button will route its internal effects (EFX) bus to the Main output. It will
illuminate yellow when the bus is patched to the Mains. To mute the effect bus in the
Main output, simply unassign it.
Assigns/Unassigns FX bus to Aux 1-4.
This button will route its internal effects (EFX) bus to all four Aux outputs. It will
illuminate yellow when the bus is patched to the Aux buses. To mute the effect bus in
the Auxes, simply unassign it.
Adjusts the Master Level of the Effects Bus.
This knob controls the overall output level of the effects mix return.
Controls
4
Aux Sends
4.4
27
27 27